CA TAS5613 2.1 channel Bluetooth Class D digital power amplifier

Description:

Use original TAS5613, NE5532 or TL072

The resistors are made of precision patches, ensuring a good signal-to-noise ratio of the whole machine.

PCB adopts 1.6mm thick double-sided board, 2.0 oz copper thickness, and full tin spraying process to ensure good passing performance of large and small currents. Top-notch PCB quality.

n adopts a fully enclosed dust-proof potentiometer, which has more stable performance and is more durable than ordinary potentiometers!

Using red and gray ring audio-specific high-current inductors to ensure crisp and powerful sound.

nThis machine adoptsall-aluminumchassis, < /span> The surface of the chassis is all treated with brushed oxidation coloring process!

nThe way to connect to Bluetooth is the same as that of ordinary devices!

 Input method: Analog and Bluetooth input functions. When the two methods are input at the same time, the Bluetooth input takes priority. After the Bluetooth connection, the RCA input is automatically disconnected; when analog input is required, please turn off the Bluetooth function of the mobile phone before switching.

Basic parameters:

1. Working method: Category D

2. quiescent current: 65mA

3. Work efficiency: 88%

4. Output power: 4 ohm speaker, 150W+75W*2, at this time THD+N>=10%

5. Frequency response: 20Hz to 20KHz

6. Dynamic range:>100 dB

7. Signal-to-noise ratio: 100dB(A-Weighted)

  Load range: 4-8 ohms

8. Working voltage: DC24V-36V (input connector: outer 5.5MM*inner 2.5MM)

9. Potentiometer function: from left to right, bass adjustment, treble adjustment, volume adjustment

10. Size: 180*100*43mm